Power
source
DC5V
Power
Consumpt
ion
5W
Effective
receiving
angle
360 degrees,
100m in
spacious area
Note: Keep the shield clean and transparent, never paste or cover anything onto the shield,
and scrub surface with wet cloth regularly.
Installation:
1. Through the fixing hole install the receiver to a proper place, such as ceiling, the
height between floor and receiver should be less than 3 meters (if the ceiling is too
high, please install it with a bracket). You also can put the receiver directly on
desktop.
2. Connect the receiver and computer with the 3m cable (please refer to the figure
above, make sure that each port is well connected).
Note: The system is designed for indoor usage, so all equipments can only be installed
indoor to avoid direct sunshine irradiation, thunder attack and outer interference. When
system is running, the receiver can not be blocked by metal object. Meanwhile, please don’t
place the receiver in strong magnetic or electric field, and try to avoid the interference of
strong signal within 2.4 GHz.