working mode, you can press “Rush-answer” key to send the answer directly, you
don’t need to press
“>>>/OK”
key.
3. Working Mode and Answer Type
3.1 The Working Modes include “Answer question one by one” (default mode),
“Answer question together”, and “Homework mode”. There are several ways to
switch the working mode. When the receiver is activated, you can press
“>>>/OK”
to
switch the working mode to receiver’s working mode (the receiver’s working mode
depends on which application you have run). You also can press
“Fn” + “0/Mode”
to
switch between “Answer question one by one” and “Answer question together”. To
enter “Homework mode”, press
“Fn” + “9”
or
“Fn” + “0/Mode”
. To quit “Homework
mode”, press
“Fn” + “0/Mode”
to switch to other mode. In “Answer question one by
one” mode, Area
①
of LCD indicates Remote ID. Each time you send signal, only
answer will be sent. In “Answer question together” mode, Area
①
of LCD indicates
Question No. Each time you send signal, both answer and Question No. will be sent.
3.2 The Answer Types include “A-F Single”, “A-F Multi”, “0-100”. When the receiver
is activated, you can press
“>>>/OK”
to switch the answer type to receiver’s answer
type (the receiver’s answer type depends on which application you have run). You
also can press “Fn” + “0/ Mode” to switch between these answer types.
3.3 If the running application is “Quiz Master”, the corresponding working mode is
“Answer question one by one”. In this mode, the answer type can be “A-F Single”,
“A-F Multi”, and “0-100”. The participant number is within 400. If the running
application is “Standard Exam”, the corresponding working mode is “Answer
question together” and “Homework mode”. In “Answer question together” mode, the
answer type can be “A-F Single” or “A-F Multi”. The participant number is within 400.
In “Homework mode”, the answer type can only be “A-F Single”. The participant
number is within 400.