Pos : 3. 7 / 0005 R ETSCH /0005 RET SCH Bedienungs anl eit ung en Kapi tels ammlungen/ 0005 milling/XRD-Mill McCr one/M odulor dner/ 0015 Tr ans port Lief er umfang und Aufst ellen XRD-Mill McCrone/ 1510 Aufst ellen des G er ätes @ 9\ mod_1427187563362_9. doc x @ 76763 @ 3334 @ 1
4.8.1
Screw connection with mounting brackets
Fig. 1: Screw connection with mounting
–
For maximum operating efficiency, the mill must be fixed securely to a stable
bench
•
Align the supplied drill template to the bench
•
Drill the four holes in the bench using the marked drilling positions
•
Align the device between the drilled holes
•
Slide the supplied mounting brackets
•
Where possible use the screws supplied
•
Screw the device tight
Use the following parameters as a guide when selecting
the installation materials
Min. bench thickness
Drill diameter
Choice of screw
•
Check the screw connection regularly to ensure it is tight
4.8.2
Screw connection of the devi
Fig. 2: Screw
–
For maximum operating efficiency, the
bench
•
Align the supplied drill template
•
Drill
•
Align the device between the drilled holes
•
Where possible use the screws suppli
•
Screw the device tight
Use the following parameters as a guide when selecting the installation site and
the installation materials:
Transport, scope of delivery, installation
Screw connection with mounting brackets
Screw connection with mounting brackets
For maximum operating efficiency, the mill must be fixed securely to a stable
bench.
Align the supplied drill template to the bench.
Drill the four holes in the bench using the marked drilling positions
Align the device between the drilled holes.
Slide the supplied mounting brackets (VBL) into the designated cut
Where possible use the screws supplied (VBS).
Screw the device tight.
Use the following parameters as a guide when selecting the installation site and
the installation materials:
. bench thickness: 30mm.
Drill diameter: Ø3mm.
Choice of screw: self-tapping screw ISO 7049-ST4,8x32-C-
Check the screw connection regularly to ensure it is tight
Screw connection of the device from underneath
Screw connection of the device from underneath
For maximum operating efficiency, the mill must be fixed
bench.
Align the supplied drill template to the bench.
Drill two holes in the bench using the marked drilling positions
Align the device between the drilled holes.
Where possible use the screws supplied (VUS).
Screw the device tight.
Use the following parameters as a guide when selecting the installation site and
installation materials:
VBS
VBL
VUS
Transport, scope of delivery, installation
17
For maximum operating efficiency, the mill must be fixed securely to a stable
Drill the four holes in the bench using the marked drilling positions (VB).
to the designated cut-outs.
the installation site and
-Z.
Check the screw connection regularly to ensure it is tight.
fixed securely to a stable
the marked drilling positions (VU).
Use the following parameters as a guide when selecting the installation site and
VBS
VBL
