Transport, scope of delivery, installation
18
Max. bench thickness: 50mm
Drill diameter: Ø8mm
Disc: Disc DIN 9021-6,4-140HV
Choice of screw: cylinder head screw DIN912 M6x60-A2
•
Check the screw connection regularly to ensure it is tight.
4.8.3
Attaching with Powerstrips
–
For maximum operating efficiency, the mill must be fixed securely to a stable
bench.
•
Place a soft, clean mat next to the device.
•
Tilt the device onto its side.
NOTICE
•
Observe the instructions for use on the Powerstrips.
•
Stick eight Powerstrips to the base plate of the device.
•
Use the marked positions (BP) on the drill template as a guide.
•
Peel the protective film off the Powerstrips.
–
After positioning it will no longer be possible to move the device.
•
Place the device in the desired target position.
Use the following parameters as a guide when selecting the installation site and
installation materials:
Powerstrips: Tesa Powerstrips max.2kg
•
Check the strips regularly to ensure they are firmly stuck.
4.8.4
Drill template
Fig. 3: Drill template
Pos : 4. 1 / 0010 ELTR A/ 0005 R ETSCH /0005 RET SCH Bedienungs anl eit ung en Kapi tels ammlungen/------- Seit enumbruc h ----------- @ 0\ mod_1222344373758_0. doc x @ 2386 @ @ 1
VB
VU
BP
