6
Radio Operation Instructions
Volume
Tap the Volume Paddle(6) up or down to adjust the volume between 0-46
(minimum-maximum)
.
Mode
(available sources vary by model)
Press the inner Left Arrow(8) to select from available listening sources:
RADIO(AM/FM/HD), DAB, AUX 1, AUX 2, USB 1, USB 2, BT Audio, or
SiriusXM®.
NOTE: The USB mode will not appear unless a USB device is plugged in.
The USB and auxiliary inputs are located at the back of the Radio Motor.
The auxiliary input(s) may be used to play music from any portable device
with a standard headphone output, such as an MP3 player, iPod®/iPhone®,
portable CD player, or portable satellite radio receiver. The USB inputs
allow you to control your iPod®/iPhone®
(Motor 4HD Only)
or play music
from a flash drive. The USB cables must be routed to an accessible area
during installation to use the USB inputs. A USB/AUX extension cable may
be required for your vehicle.
Radio Tuning
Tap the Auto Paddle(7) up or down to tune to the next or previous AM/FM
frequency, HD Radio™ station
(when available)
, or DAB/DAB+ channel.
NOTE: When the radio is tuned to a strong FM station, the stereo indicator
will appear in the LCD’s upper right corner
(two oval circles)
.
Radio Bands
Press the outer Right Arrow(9) to cycle through the five radio bands
(two
AM and three FM)
.
Storing Radio Presets
There are six radio presets for each radio band. Tune to the desired radio
station and then press and hold the desired Preset Button(5) to store the
station into memory.
Recalling Radio Presets
To recall radio presets, press the appropriate Preset Button(5) in the
selected radio band.
Mute/Pause
Press the Mute Button(4) to mute/unmute or pause/play depending on the
source mode.
