12
System Settings
VAL is shown)
and press the System Button(3) to accept. Tap the Auto
Paddle(7) up or down to adjust the level between 0-46. Once the desired
setting is shown, let the unit time out to set.
SEL Panel
This sub-menu changes the operating mode for specific Radio Faces.
WARNING: If the wrong setting is selected in this menu the radio's
controls will not function properly.
To access the SEL PANEL sub-menu, press and hold the System Button(3)
for three seconds. Tap the Auto Paddle(7) up or down until SEL PANEL
appears on the screen. Press and release the System Button(3) to enter
the panel choices. Tap the Auto Paddle(7) up or down to select the desired
option. Once the desired setting is shown, let the unit time out to set.
RESETTING SEL PANEL MODE:
With the vehicles ignition on and the
time displayed on the Radio Face, press and hold the Power Button(1) for
approximately 15 seconds to reboot the radio into the SEL PANEL sub-
menu directly.
(see "Important First Step" on page 5)
Software Info
This sub-menu displays the unit’s software version.
To access the sub-menu, press and hold the System Button(3) for three
seconds. Tap the Auto Paddle(7) up or down until the software version
appears on the screen
(example: V123456)
.
System Reset
This sub-menu resets the unit to factory settings.
To access the RESET sub-menu, press and hold the System Button(3) for
three seconds. Tap the Auto Paddle(7) up or down until RESET appears
on the screen. Press and release the System Button(3) to reset the unit to
factory settings. The unit will reset and turn off.
Digital Signal Processor
This sub-menu sets the Digital Signal Processor
(DSP)
Setting. The
default setting is off
(DSP OFF)
. When activated, you are able to select
one of three preset equalization settings:
• CLASSIC: This setting offers subtle sonic adjustments that lend
themselves to classical music.
• POP: This setting accentuates bass and treble frequencies and is
