15
www.retromanufacturing.com
System Settings
Bass Frequency
This sub-menu adjusts the bass tones’ frequency crossover point be-
tween 60Hz, 80Hz, 100Hz, or 200Hz.
To access the BAS sub-menu, press and release the Audio Button(2)until
BAS 80H appears on the screen. Tap the Volume Paddle(6) up or down to
select the desired setting. Once the desired setting is shown, let the unit
time out to set.
Mid Frequency
(available on select models)
This sub-menu adjusts the mid-tones’ frequency crossover point between
0.5KHz, 1.0KHz, 1.5KHz, or 2.5KHz.
To access the MID sub-menu, press and release the Audio Button(2) until
MID 1.0K appears on the screen. Tap the Volume Paddle(6) up or down to
select the desired setting. Once the desired setting is shown, let the unit
time out to set.
Treble Frequency
This sub-menu adjusts the treble tones’ frequency crossover point
between 0.5KHz, 10.0KHz, 12.5KHz, 15.0KHz, or 17.5KHz.
To access the TRE sub-menu, press and release the Audio Button(2) until
TRE 10.0K appears on the screen. Tap the Volume Paddle(6) up or down
to select the desired setting. Once the desired setting is shown, let the
unit time out to set.
USB Inputs
USB inputs
(available on select models)
are located at the rear of the
Radio Motor. The USB cables must be routed during installation to a
convenient and accessible location for connecting USB devices.
NOTE: The USB Mode will not appear in the menu unless a USB
device is plugged in.
USB Device Connection
Connect your USB Flash Drive, iPod®/iPhone®, or other supported USB
devices to one of the USB inputs. The radio will display USB1, USB2, or
iPod (if an Apple device is plugged in) for three seconds indicating the
device has been connected successfully. After connecting a USB device,
the radio will display the USB icon
(or IPOD text) on the screen and
automatically find your songs and begin playback.
