17
www.retromanufacturing.com
Bluetooth® Device Operation
Bluetooth Controls
T A L K 0 0 : 0 0
8 Left Arrows
Bluetooth
®
(available on select models)
When using a Bluetooth® device for the first time, you must enable
Bluetooth® and pair the device with the unit. With your radio on the unit is
ready to pair, look for "RETROSOUND" in your Bluetooth® device list and
enter "00000" if prompted for a password. (see page 11)
Making a Call
To make a call, dial the desired number on the paired cell phone. Once
dialing is in progress; CALLING will appear on the screen. When a call is
in progress, TALK will appear on the screen along with the elapsed call
time
(TALK 00:00)
. During a call, the radio music source will be muted,
and the call audio will broadcast through your car’s speaker system.
Answering a Call
When a call is incoming, any audio playback from the current source will
either be muted or paused (depending on the source). PHONE IN will be
shown on the screen along with the caller ID if it is enabled by the phone/
carrier. To accept the call, press the outer Left Arrow(8). To end the call
press the outer Left Arrow(8) again.
Streaming Music
With a device paired, press the inner Left Arrow(8) to select BT AUDIO.
Next, select your desired playback source on your device (Apple Music®,
Spotify®, Pandora®, YouTube Music®, etc.) and play the music as you
normally would.
(NOTE: ensure the volume on your device is turned up.)
Browsing Music
(not available on all devices)
Some devices will allow you to browse folders and skip songs using the
Auto Paddle(7) and the inner Right Arrow(9). To skip songs, tap the Auto
Paddle(7) up or down. To browse music, press the inner Right Arrow(9) to
access the browsing sub-menu, then tap the Auto Paddle(7) up or down
to cycle through the options (artist, album, song, folder) and press the
System Button(3) to make your selection.
Auto Paddle 7
Right Arrows 9
System Button 3
