Retigo vision, Operating Manual

Page: 33 / 66

OPERATING MANUAL FOR RETIGO BLUE VISION COMBI STEAMERS
33
ver. EN04/06/12
Here a menu with possible program choices will
appear. Find and press the “Add a pictogram” button
with the help of arrows.
Next follow the same steps as in part A.
8.3.2 Additional work with pictograms
Additional work involves the “Options” menu in the
“Pictograms” section. Press on a pictogram and then
press “Options” button.
- Add another pictogram. More on
8.3.1.1
- You can add a discription text for
the chosen program very easily.
Read more in chapter 8.4.
- Show the program’s steps and you can
edit them.
- Rename the selected program.
- Change the pictogram picture. More in
chapter 8.3.2.3.
- Move up selected pictogram.
- Move down selected pictogram.
- Delete the marked pictogram, not the
program linked to it. More in chapter
8.3.2.5.
8.3.2.1 Assigned pictograms overview
The overview can be accessed through the
“Programs” menu.
This list shows pictograms that have already been
assigned to programs. Each pictogram consists of
a picture and the name of the particular program.
8.3.2.2 Launching a program with a pictogram
Launching programs in the “Pictograms” menu is
very simple. You just double press the pictogram. This
way you will enter the standard program launch screen
(see chapter “8. Recipes”). After that you just push the
“START” button
8.3.2.3 Changing the pictogram
To change the pictogram, press the picture you want
to change once in the “Pictogram” menu. The selected
picture will be marked red.