Resson Technologies RD-11M, Operation Manual

Page: 54 / 94

- 50 -
enter Maximum Cut ( ) MAX CUT
MAX CUT
= 0.3mm
enter Z step increment ( ) Z STEP
Z Axis increment per
step machining is fixed
Z STEP = 0.3 mm
simulate Z axis move one step down
step 8 :
enter Z incremental step machining
RD-11M provides two options on the Z incremental step machining. The Operator can enter select the
smooth R function which best suits the job.
Option 1 : Fixed Z step ( ) Z STEP
The Z increment per step machining is fixed, and as the ARc's curvature varies with
their Z position, the operator has to use their experience to select different Z STEP increments during
the ARC machining to get the optimal, fast machining
Option 2 : Maximum Cut ( ) MAX CUT
Under this option, RD-11M will calculate the best possible Z increment per step machining according to
the curvature of ARC, to make the interpolated point approximately equal to the MAX CUT entered.
RD-11M will calculate the best
Z step increment so that the
Max. distance between each
machining point approximately
the same.
All R funtion machining to enter into ARC machining mode
parameters have already
entered into RD-11M
simulate Z axis move one step up
before the start of ARC machining, please ensure the tool is positioned at the ARC starting point
and Z axis dial is set to zero ( 0.000 )
The two Axis does not have a Z Axis, RD-11M
therefore, uses the RD-11M
and to simulate the Z axis movement
R
esson
Technologies
On Off
RD-11M
R
esson
Technologies
ent
R
I
O
Z STEP
0.300
On Off
RD-11M
R
esson
Technologies
ent
R
I
O
0.300
MAX CUT
On Off
RD-11M
R
esson
Technologies
ent
R
I
O
0.000
MAX CUT
On Off
RD-11M
R
esson
Technologies
ent
R
I
O
Z STEP
0.000
ent
ent