Resson Technologies RD-11M, Operation Manual

Page: 23 / 94

On Off
RD-11M
R
esson
Technologies
ent
R
I
O
- 19 -
A calculator is used frequently during a manual machining process..
RD-11M is the first DRO that has a built-in calculator
The built-in calculator of the RD-11M not only provides normal mathematical calculations
such as add, substract, multiply & divide, it also provides useful trigonometric calculations
that are frequently required during a machining process such as
SIN, COS, TAN,
SQRT SIN, COS, TAN, SQUARE... and also inv inv inv
In addition a major feature of the calculator of the RD-11M is " ", in that Result Transfer
all calculated results from the calculator of RD-11M can be "transferred" to any axis to enable
you to position the tool. After the result has been transferred to an axis, the RD-11M will
preset the zero position at the calculated value, enabling the operator temporarily
to simply move the machine back to axis display = 0.000, leaving the tool positioned at
the calculated coordinate .
The built-in calculator offers the following advantages :
1. Operations are the same as commerically availiable calculators and it is easy to use ;
2. The calculated result can be directly transfered to any axis, eliminating the need to
make notes of a calculation on paper, thus saving time and avoiding errors;
3. No unnecessary down-time in finding or sharing calculators whenever you need
one to make calculations.
" " Result Transfer key
Function :
Press this key to transfer calculated
result to the axis display, then RD-11M
will temporily preset the zero at calculated
value, operator then just moves the machine until
display = 0.000, and the calculated position
is reached.
key to enter AXIS position
into calculator function
Calculated Result Display
"Inverse" key
for trigonmetric
calculations
"CE" key
as normal calculator
Calculator keypad
trigonmetric calculations key
Key layout of the built-in calculator
"Calculator" key
key to enter into calculator function
R
esson
Technologies