4-7
REM
staR
M s
ERiEs
U
sER
M
anUal
1.
Alttude Adjustment Screen
You can adjust the altitude setting by pressing the Plus (+) or
Minus (-) buttons to increase or decrease the setting to 1, 2,
or 3. Use these guidelines to find the setting best for you:
•
1 = less than 2500 ft. (<762 m)
•
2 = 2500 to 5000 ft. (762 m to 1524 m)
•
3 = 5000 to 7500 ft. (1525 m to 2286 m)
Note:
Elevations over 7500 ft. (2286 m) may affect the
accuracy of the pressure. Your home care provider
can verify the pressure setting with a water column
manometer.
Warning:
If you set the manual altitude setting incorrectly,
the pressure may be too high or too low, depend-
ing on your location.
2.
Ramp Startng Pressure Adjustment Screen
You can increase or decrease the ramp starting pressure in
0.5 cm H
2
O increments by pressing the Plus (+) or Minus (–)
buttons. The default setting is 4 cm H
2
O. You can adjust the
setting from 4 cm H
2
O to the CPAP pressure setting.
Note:
This screen appears only if the ramp feature is enabled
by your home care provider.
Summary of Contents for REMstar M Series
Page 1: ...1016452 AM 2 09 06 ...
Page 22: ...2 4 REMstar M Series User Manual ...
Page 30: ...3 8 REMstar M Series User Manual ...
