Respironics REMstar M Series User Manual Download

Page: 9 / 59

1-1

REM

staR

M s

ERiEs

sER

anUal

haptER

1: i

ntRodUCtion

This chapter provides information on:

•  System contents
•  Intended use
•  Warnings, cautions, and contraindications
•  System overview
•  Glossary and symbol key
•  How to contact Respironics

1.1 s

ystEM

ontEnts

Your REMstar M Series system includes the following items:

REMstar M Series Device

Flexible Tubing

Reusable Gray Foam

Filter

Disposable Ultra-fine

Filter

Power Supply

AC Power Cord

Carrying Case

User Manual

Quickstart Guide

igURE

1–1 s

ystEM

ontEnts

Note:

If your system includes a humidifier, you will receive additional items with your

package. See the instructions included with your humidifier for more informa-

tion.

Note:

If any of the above items are missing, contact your home care provider.

Summary of Contents for REMstar M Series




























































Search results

Summary of Contents for REMstar M Series

Reviews:

Related manuals for REMstar M Series

Brands by name

Popular brands

Respironics REMstar M Series, User Manual

Search results

Summary of Contents for REMstar M Series

Reviews:

Related manuals for REMstar M Series

Brands by name

Popular brands