101
4.4.20.3
Service
This menu is accessed by pressing the ‘SERVICE’ button in the main menu (see Figure 4.43)
If you press
Transport, Configuration
or
Servo System
button in
Service menu
, you will be
asked for a password, type the right password to enter the other menus.
After you fill in the right code press enter, it will go back to password screen, press ok and you
are in the relative menu.
Press button
return
and the screen goes back to the Main Menu.
4.5
Access code
The ‘Access code’ button enables the user to input a code for access to the Main Menu, where
changes can be made to the machine and the packaging program settings. This code may be
used only by staff authorised to change the settings.
Figure 4.43 Service
