93
Punch up/down button is only visible when in configuration one or more punches are selected and when in
configuration/”invert sensors ( see figure” the button has been released.
Button “change of punch anvil” has been released.
Button “change of punch anvil” is not released.
The value of the
set points
can be changed by pressing the numbers. A numeric keypad
(Figure 4.6) will appear, fill in the desired settings, press enter, now the numeric keypad will
disappear and the value for the SP has changed.
Press
Save
to store the settings in the current program.
Press
return
and the screen goes back to the previous menu.
Figure 4.36a Invert sensors screen
