repabad Vision 1000, Operating Instructions Manual

Page: 9 / 28

9 0022771-01_BEDWHPV.1 12/2021 •
repa
BAD GmbH • We reserve the right to make technical changes. All dimensions in cm.
The keylock is activated when the
key flashes, irrespective of which key is pressed.
All functions are blocked (please refer to the following page).
If a function is selected by pressing a key, this key is illuminated as long as the function is active.
The corresponding keys are also illuminated for functions that are selected by the massage pro-
gramme.
If a key flashes quickly after being pressed, it is not possible to carry out the function selected. This
is because one of the conditions necessary for the function has not been met, such as not enough
water in the whirlpool.
Turns the jet massage on and off (only when the tub is full).
Press the key again to switch the interval function (increasing and decreasing massage
intensity) on. Press the key a third time to switch the jet massage off again.
If the interval function is activated, the
key is illuminated as intensity increases and
the key as it decreases.
Increases the jet massage intensity (if the jet massage is on).
The key illuminates if pressed and flashes when the maximum value is reached.
Decreases the jet massage intensity (if the jet massage is on). The key illuminates if
pressed and flashes when the minimum value is reached.
Press once to turn on the LED whirlpool lighting (optional).
Press again to set the next colour.
After pressing for a sixth time, the colours begin to change automatically,
starting with magenta.
Press again while the colours are alternating to choose the colour.
The key flashes slowly.
Press again to restart the colour change process.
Press and hold to turn off the LED whirlpool lighting.
Operation
Operation with the Vision 700 control panel