12 0022771-01_BEDWHPV.1 12/2021 •
repa
BAD GmbH • We reserve the right to make technical changes. All dimensions in cm.
Air massage
Turns the air massage on or off when output is set to medium (even when the tub is
empty). A few minutes after the bath, when the bath water has drained off, the key
flashes until the blow-out and fresh water rinsing (special accessories) automatic pro
-
grammes are completed.
Increases the intensity of the air massage (if the air massage is on).
The key illuminates if pressed and flashes when the maximum value is reached.
Reduces the intensity of the air massage (if the air massage is on). The key illuminates if
pressed and flashes when the minimum value is reached.
Activates the interval function for the air massage (only when the tub is full).
If the air massage is off, it is turned on when the interval function
is activated.
If the interval function is activated, the
key is illuminated as intensity increases and
the
key as it decreases.
Temperature setting (only with supplementary heating special accessory)
Use the
and
keys beneath the display to set the temperature.
Activate the keys by pressing and holding the
key.
Press once to increase target temperature by 1°C (setting range 10-42°C)
Press once to reduce target temperature by 1°C (setting range 10-42°C)
The bath water temperature is shown on the display during normal operation. The desired temper-
ature is displayed and can be adjusted when the
and
keys are activated. Approximately 4
seconds after the last target temperature change, the display switches back to the actual tem-
perature. If the bath water temperature is lower than the target temperature when the heating
is on, this is shown by a dot after the temperature display. When the jet massage is switched on,
the supplementary heating (a special accessory) is also switched on and the water heated to the
desired temperature.
Operation
Summary of Contents for Vision 1000
Page 27: ......
