11
0022771-01_BEDWHPV.1 12/2021 •
repa
BAD GmbH • We reserve the right to make technical changes. All dimensions in cm.
The keylock is activated when the display shows
--
, irrespective of which key is pressed. All func-
tions are blocked (please refer to page 13).
You can select a function by pressing the corresponding key.
The key is illuminated for as long as the function is active.
The corresponding keys are also illuminated for functions which are
selected by the massage programme.
If a key flashes quickly after being pressed, it is not possible to carry out the function selected. This
is because one of the conditions necessary for the function has not been met, such as not enough
water in the whirlpool.
Jet massage
Turns the jet massage on and off (only when the tub is full).
Press and hold to activate the
and
keys for setting the temperature.
Increases the jet massage intensity (if the jet massage is on).
The key illuminates if pressed and flashes when the maximum value is reached.
Decreases the jet massage intensity (if the jet massage is on). The key illuminates if
pressed and flashes when the minimum value is reached.
Turns the aeration on or off. Adding air increases the intensity of the massage. If the jet
massage is off, activating the aeration also turns on the jet massage (only when the
tub is full).
Switches the jet massage interval function (increasing and decreasing massage intensi-
ty) on when the bathtub is full. If the jet massage is deactivated, it is activated with the
interval function.
If the interval function is activated, the
key is illuminated as intensity increases and
the
key as it decreases.
The direction of the massage jet is set by swivelling the jet nozzles or micro jet nozzles.
Jet massage
Air massage
Display
Temperature setting
Whirlpool light-
ing
Fresh water rinsing/
disinfection
Programme
selection
Operation
Operation with the Vision 1000 control panel
Summary of Contents for Vision 1000
Page 27: ......
