20 0022771-01_BEDWHPV.1 12/2021 •
repa
BAD GmbH • We reserve the right to make technical changes. All dimensions in cm.
10 SERVICING
Topping up the disinfection tank
(only if you have the disinfection system as a special accessory)
If the
key flashes quickly when the disinfection system is started (please refer to page 17),
the disinfection tank must be topped up.
Disinfectants cause skin irritation!
Ensure that you observe the safety instructions on the label of the disinfectant!
Keep disinfectants out of reach of children!
You must not bathe in the whirlpool whilst it is being disinfected!
Depending on the frequency of use, you should disinfect the whirlpool roughly
every 4 weeks. Only use Repabad disinfectant (art. no. 0002511). If other bath
agents are used, you run the risk of damaging the whirlpool.
- Unscrew the cover on the filling opening on the rim of the bathtub.
- Pour in one bottle (1 litre) of Repabad disinfectant (art. no. 0002511) using a funnel.
- Close the filling opening cover again tightly.
Cleaning the nozzles
As required, remove the lime scale deposits on the whirlpool nozzles using Repabad “Special cleaner”
(art.no. 0010276). Please refer to page 21 for instructions on how to remove and install the nozzles.
Servicing
Summary of Contents for Vision 1000
Page 27: ......