RENPHO RP-AP001S, User Manual

Page: 5 / 42

●
Do not
let water or any other liquid or flammable detergent enter the
appliance to avoid electric shock and/or a fire hazard.
●
Do not
clean the appliance with water or any other liquid or a (flammable)
detergent to avoid electric shock and/or a fire hazard.
● Check if the voltage indicated on the bottom of the appliance corresponds to
the local mains voltage before you connect the appliance.
● If the mains cord is damaged, you must have it replaced by distributor, or a
service center authorized by distributor or similarly qualified persons in order to
avoid a hazard.
● Do not use the appliance if the plug, the mains cord or the appliance itself is
damaged.
● This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
● Children should be supervised to ensure that they do not play with the
appliance.
● Do not block the air inlet and outlet, e.g. by placing items on the air outlet or in
front of the air inlet.
● This appliance is not a substitute for proper ventilation, regular vacuum
cleaning or use of an extractor hood or fan while cooking.
● If the wall socket used to power the appliance has poor connections, the plug
of the appliance becomes hot. Make sure you plug the appliance into a
properly connected wall socket.
● Always place and use the appliance on a dry, stable, level and horizontal
surface.
● Leave at least 40cm free space behind and on both sides of the appliance
and leave at least 40cm free space above the appliance.
Safety Information
Danger
IMPORTANT:
Please read and comply with all of the instructions and
warnings provided in this manual before using the product. Failure to comply with
the instructions and warnings provided herein may result in inaccurate results
and/or damage to the product itself.
Warning
Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
FCC ID: 2AUO3-RPAP001S
3