RENPHO RP-AP001S, User Manual

Page: 35 / 42

3) To remove the pre-filter, grab the two projections
at the top and pull the filter towards you. (c)
4) Wash the pre-filter under a running tap. If the
pre-filter is very dirty, use a soft brush to brush
away the dust. (d)
5) Air-dry the pre-filteraway the dust. (d)
6) Put the pre-filter back into the appliance. Attach
all hooks properly to the appliance. (e)
7) To reattach the front cover, insert the bottom
hooks into the bottom of the appliance first. Then
push the front cover against the body of the
appliance. (f)
Note
:
Make sure that the pre-filter is completely
dry. If it is still wet, bacteria may multiply in it
and shorten the lifespan of the pre-filter.
Note
:
Make sure that the side with the two
projections is pointing towards you. You also
can find word “Front”.
Tip :
Alternatively, you can clean the pre-filter by
removing the dust with a vacuum cleaner.
33