4. Put filter 4(HEPA filter), filter 3(Activated carbon filter), filter 2(Charcoal filter),
filter 1(Pre-filter) back into the appliance. For more detail, see section "Filter
replacement".
1. Put the plug in the wall socket
All lights will turn on once and you hear a beep. Then the lights go out again.
3. AQ(Air Quality)
Built-in air quality sensor can detect air quality, after switching on the appliance,
it will show the quality of the air automatically through the different colors.
4. Filter replacement lights
The 4 filters:
1. Washable Pre-filter
2. Charcoal filter
3. Activated carbon filter
4. HEPA filter with anti-bacterial peptide
When the light on the filters indicator flashes, it means
that corresponding filters need to be cleaned or replaced.
5. Fan speed adjustment and Auto Mode
2. Press the on/off button to switch on the appliance.
Using the Appliance
Filter
AQ indicator color
Air quality level
Blue
Good
Yellow
Fair
Red
Bad
AQ indicator
The fan speed light indicates at which fan speed the appliance is operating.
Press Speed button to adjust 1~3(refers to
low, medium, high
) fan speed
level. Press the Speed button again to enter Auto mode and the fan speed will
be automatically adjust according to AQI level as shown below:
The power light and FAN SPEED 1 (lowest) light will turn on.
9
Summary of Contents for RP-AP001S
Page 1: ...RP AP001S USER MANUAL READ AND SAVE THESE INSTRUCTIONS model RP AP001S...
Page 15: ...A B 5 Follow the in app instructions to connect to WiFi 13...
Page 18: ...4 Follow the in app instructions to connect to WiFi 16...
Page 19: ...Using the App From the My Home screen tap to turn the air purifier on and off 17...