RENPHO RP-AP001S, User Manual

Page: 37 / 42

2. Reset Filter's lifetime
Note :
For more detail on the sequence to put
filters back into the appliance, please refer to
the drawing on page -- “
product structure
”.
4) To remove the filter 2 (charcoal filter) which is fixed
by velcro with filter 3, just tear it off and replace
the new charcoal filter. (d)
5) To remove the filter 3 (activated carbon filter), grab its
tag and pull it towards you, then replace the new
activated carbon filter. (e)
6) To remove the filter 4 (HEPA filter), grab its tag
and pull it towards you, then replace the new
HEPA filter. (f)
7) To reattach the front cover, insert the bottom hooks
into the bottom of the appliance first, then push the
front cover against the body of the appliance. (g)
8) Put the plug in the wall socket and switch on the
appliance again. (h)
After replacing the filters, when you switch on the
appliance, the replace filter light will still flash. You
need to reset the filter ’s lifetime sensor, so that the
appliance can calculate the filters’ lifetime.
Press the button. The light will turn on but not flash,
meaning you choose this filter No. to reset,Press and
hold button for 3 seconds, the light of the filter will
turn off completing the reset.
35