RENPHO RP-AP001S, User Manual, Page: 38 / 42

4) To remove the filter 2 (charcoal filter) which is fixed
by velcro with filter 3, just tear it off and replace
the new charcoal filter. (d)
5) To remove the filter 3 (activated carbon filter), grab its
tag and pull it towards you, then replace the new
activated carbon filter. (e)
6) To remove the filter 4 (HEPA filter), grab its tag
and pull it towards you, then replace the new
HEPA filter. (f)
7) To reattach the front cover, insert the bottom hooks
into the bottom of the appliance first, then push the
front cover against the body of the appliance. (g)
8) Put the plug in the wall socket and switch on the
appliance again. (h)
3. Filter Replacement Force Mode
Note
:
Press button or simply not press anything for 60 seconds
and the appliance will exit the Filter replacement force mode.
If you use the appliance in an environment with more pollution, you can replace
these filters even if the light does not flash. The filter replacing method is the
same.
To force reset the filter ’s lifetime:
1) Power plugged and turn off the appliance, press and hold for 5 seconds and
the filters light will flash.
2) Press button repeatedly to choose the appropriate filter. The chosen filter
light will stop flashing. Press and hold button for 3 seconds and the filter
light turn off and the complete the reset.
3) You can repeat step 2 to turn off other filters lights to complete all filters’ reset.
Filter
36