Updating DSP Firmware
The latest 48 kHz DSP firmware files (.bin files) were installed in your array before it was shipped to you. These files contain the loud-
speaker specific EQ, crossover and protection settings for the loudspeaker and are updated from time to time as the firmware is
improved.
If you wish to operate your system at 96 kHz, you will need to download and install the 96 kHz .bin files for your loudspeaker(s).
We may ask you to update the .bin files as part of troubleshooting, if you are having problems with your system, Be aware that .bin files
names which start with RH4... are 48 kHz files; 96 kHz files start with RH9... You’ll find the .bin files on the RHAON download page
below the Program download.
Important: When upgrading earlier versions of Microcontroller and DSP firmware to version 1.6, it is critical that the
Microcontroller firmware be installed first.
These files need to be placed in the “DSP_Firmware” sub folder of your RHAON installation (typically “C:\Renkus-Heinz\
RHAON\DSP_Firmware”).
Step 1:
In RHAON, select either the Control or Supervise mode and then right-click on one of the loudspeaker listings in the directory
tree view or on the loudspeakers icon in the main display area and select “Update DSP Firmware…”. The pop up menus are the same
ones we explored on page 41 under Updating Microcontroller Firmware.
Selecting Update DSP Firmware will open the window shown below. Notice that the program lets you know what firmware is installed in
the loudspeaker.
Step 2:
Select the appropriate firmware to download and press “Download”. If no listings appear in the white field, it’s a sign that you
have not downloaded any .bin files for that loudspeaker from the web and placed them in the DSP_Firmware folder.
43
Users Manual
