Users Manual
C
O
N
N
E
C
T
M
O
D
E
13
Saving Changes
Inside each loudspeaker’s Connect, Control and Supervise Properties window is a blank black bar in the lower left corner. Whenever
you make a change in the loudspeaker settings, the word Save will appear in this space. This is a reminder that a change has been
made and needs to be saved if you want to keep it. Pressing the Save button will save the change(s) to the project file and to the
loudspeaker’s flash memory.. Note that although the changes are being sent to the project file, the project file itself is not being
saved.
The Network Manager
Most Iconyx IC-R and ICL-R / ICL-FR setup and installation problems are “network problems” and not Iconyx or RHAON problems.
Your Iconyx array was factory tested before it left our factory and barring shipping damage should be in perfect operating condition.
The RHAON Network Manager allows you to check the integrity of the Ethernet network before you actually link to the loudspeakers.
It is accessed from the File pull down menu.and identifies network problems for you before you waste a lot of time checking out the
loudspeaker.
In the example shown here the ICL-FR Left obviously has a network communications problem while the CF61 DBL and the
VoiceBox are suspect.
For more details on the Network Manager refer to page 65.
