Control Mode provides access to the Loudspeaker
Amplifier’s internal DSP and allows you to control its
settings. You can enter Control Mode by clicking on
the CONTROL button at the top of the main work-
space, or from within any loudspeaker’s Properties
window. Any or all of the Control functions can be
restricted to authorized operators who have password
access; more information on password authorization
can be found in the Supervise Mode section of this
manual.
When you enter Control mode in the main workspace,
the directory tree on the left remains the same.
However, notice that the icons themselves have
changed. The CobraNet Rx and Tx arrows are gone.
On the left, an On/Off button allows you to switch the
amplifier(s) On or select Standby (Off) mode. The
Wink button is below this switch. On the right, a Mute
button is labeled with a driver symbol. Below it is a
Signal Present indicator.
Double-click a loudspeaker icon to open its Properties window in Control mode. Notice that the left hand section of the Control mode
Properties window is the same as in Connect mode.
On/Off (Standby) button
Wink light button
Signal Present indicator
Mute button
Status Indicator
Name
21
Users Manual
CONTROL MODE
C
O
N
T
R
O
L
M
O
D
E
