Continue until all networked loud-
speakers are linked to icons in the
main workspace. When an icon is
linked to a networked loudspeaker, the
status indicator under its name
changes from Unassigned (Red) to OK
(Green).
To confirm that the setup is complete,
place the cursor over the loudspeaker
listings in the directory tree. As you
can see from the pop up screens,
RHAON has assigned IP numbers to
each of the loudspeakers.
Let’s take a closer look at the Connect Mode loudspeaker icon
Clockwise from the top, the first item is the icon’s name. By default this is the model number of the actual loudspeaker. It can be
changed to something more descriptive (“balcony center,” for example) in the Connect Properties window. The loudspeaker sym-
bol on the right is a Mute control: click on it to mute or un-mute the loudspeaker.
The green triangles on the far right represent CobraNet Transmitters (Tx). Each CobraNet Transmitter can transmit one channel
of information from the DSP out to the CobraNet network. The Status bar at the bottom of the icon indicates that the icon is
Unassigned by turning red: it will be green and read OK when this icon has been linked to a networked loudspeaker.
To its left is a “W” button. Click on it to Wink the light on the front of the networked loudspeaker that is linked to the icon. This
makes it easy to identify the loudspeaker and confirm its location. On the outside left edge of the icon are two red arrows repre-
senting CobraNet Receivers (Rx): each can receive one signal out of a bundle of up to 8 audio channels from the network.
Double clicking on a Connect Icon will open the Connect Properties screen associated with the linked loudspeaker. More details
on Properties Screens are on the next page.
15
Turns Loudspeaker Mute ON & OFF
Turn Loudspeaker “Wink” Light ON & OFF
Name
Status Indicator
CobraNet Transmitters
CobraNet Receivers
Users Manual
C
O
N
N
E
C
T
M
O
D
E
