6
Align the two modules to be joined on a tabletop or on the floor so
that the top of the lower one and the bottom of the upper one are
close to one another, say 4” (10 cm) apart.
9. Insert the free end of the short ribbon cable into the socket on
the second module. Using a small Philips screw driver, secure the
connector with two 4-40 Philips head screws (supplied). Make
sure the connectors are fully seated. You should hear a click
when they seat. If necessary, use a flashlight to check because if
the connectors are not seated properly, you may have to disas-
semble the column again in order to seat them correctly.
11. Align the two modules and carefully slide them together, mak-
ing sure the holes in the heavy joining plates align with the holes
in the modules.
Install the remaining screws into the joining plates and tighten
them.
The assembly is now complete.
IC Live Users Manual, ICL-F & ICL-F-DUAL
