This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in
-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2021 by Conrad Electronic SE. *2380005_v3_1221_02_DS_m_4L_(1)
c) Connecting to a Windows 10 device
If the device is Bluetooth enabled:
1 Press/click the Windows button/shortcut.
2 Click Settings .
3 Go to Devices > Bluetooth & other devices.
4 Turn on the device’s Bluetooth.
5 Click to connect to the unit.
6 Turn on the unit and connect to ‘Goalmu Mouse Yam’.
If the device is not Bluetooth enabled:
Use a Bluetooth dongle to connect to the unit. With the dongle connected to a USB port,
turn on the dongle if it has a switch and the Bluetooth icon should be displayed in the
Windows status bar.
• If the dongle has been connected to another device, disconnect the device’s Bluetooth and
reboot the unit.
• Make sure that the device’s Bluetooth connection is enabled.
• Note that connection methods may vary depending on your device.
Once connected, press the power button on the unit to automatically connect again.
Mouse options
1 Go to Settings > Devices > Mouse > Additional mouse options.
2 The pointer size can be adjusted in Settings > Ease of Access > Cursor & pointer size.
d)
Reset for optimisation
• Windows/Android
Press the Power and Page up buttons at the same time for two seconds.
• Mac
Press the Power and Page down buttons at the same time for two seconds.
Care and cleaning
• Disconnect the product from the mains before cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol, or other chemical solutions as
they can cause damage to the housing and functioning of the product.
•
Clean the product with a dry, fibre-free cloth.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this
product conforms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Enter the product item number in the search box. You can then download the EU
declaration of conformity in the available languages.
Disposal
Electronic devices are recyclable waste and must not be disposed of in household
waste. At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical data
Input voltage/current ..................... 5 V/ DC, 1 A
Sensor type .................................. Optical
Battery type .................................. 80 mAh, 3.7 V built-in rechargeable LiPo
Operating duration ........................ 5 hours
Charging duration .........................
90 minutes
Charger ......................................... Magnetic cable and micro 5-pin connector
Connection method ...................... Bluetooth V4.0
Frequency
..................................... 2402 - 2480 MHz
Transmission power......................
-0.98 dBm
Range ........................................... max. 10 m
System requirements
.................... Windows 10, Mac OS X 10.1, Android
5.0, iOS 13.1, iPad OS or later
Operating/storage conditions ........ 0 to +35 °C (operating)
-10 to +45 °C (storage)
45 - 85 % RH (non-condensing)
Dimensions (W x D x H) ............... 45 x 46 x 25 mm
Weight .......................................... 16 g
