This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
© Copyright 2021 by Conrad Electronic SE.
*2373320_v3_1121_02_dm_mh_en
b)
Configuring as repeater
• Click on “Repeater” in the setup wizard.
• The AP will automatically search for available Wi-Fi networks. The list will be displayed as
soon as the search is complete.
• First select the mode.
“
Gateway
”: This option serves to set up a separate network similar to the router. The AP
retains its fixed IP address “
192.168.10.1
” after configuration. The DHCP server remains
active. The devices connected to the repeater receive their IP address from the repeater. For
further configurations, log in to the web interface.
“
Bridge
”: The repeater and all devices connected to the repeater receive an IP address from
the Wi-Fi router. This option enables easier access to the repeater after configuration. The
repeater‘s IP address can be found in the network device list of your Wi-Fi router.
We recommend that you use this mode.
• Click on the Wi-Fi network you want to connect the repeater to in order to expand or strength-
en the Wi-Fi network.
You can simply scroll down a longer list.
• Enter the password to access the selected Wi-Fi network.
• The repeater also enables to adjust the names of the 2.4 GHz Wi-Fi network. The original
Wi-Fi is extended with “
_EXT
” by default. Generally, you can use the original Wi-Fi names.
The new Wi-Fi network uses the same password as the original one.
• Click on the blue button to save and connect. The AP will restart with the new settings. The
process can take up to 2 minutes.
Reconnect your device to the AP‘s Wi-Fi network and enter the password of your
Wi-Fi router.
c)
Configuring as router
• Insert one end of the network cable into the “
LAN DATA IN
” RJ45 connection on the PoE
adapter and the other end into the RJ45 connection of your modem.
• Click on “Router” in the setup wizard.
• First select the connection type.
For a DSL-modem with a dial-up, click on the “
PPPoE
” above and then enter your dial-up
name and password.
If Internet access requires a fixed IP address, select the middle menu item and enter all
required IP address data.
If Internet access requires a dynamic IP address, select the right menu item (default). No
further entries are required.
• Finally, choose a name for the 2.4 GHz Wi-Fi network.
•
Then select the encryption “WPA2-PSK” and enter a Wi-Fi password in the field below.
The password must be at least 8 characters long. We recommend that you use a
password with more characters, consisting of numbers and upper and lower case
letters.
The Wi-Fi connection should not be left unencrypted (open).
• Click on the blue button to save the setting. The AP will restart. The process can take up to
2 minutes.
•
Reconnect your device to the AP‘s Wi-Fi network and enter the previously set password.
• Once connected, click on the blue button to refresh the display.
•
For further configurations, log in to the web interface.
Advanced configuration
Clicking on the gear icon at the bottom right of the web interface opens advanced settings.
In addition to time zone and login password, you can change WAN port settings, save and
restore configuration, update firmware, display an extended device status, log out of the web
interface and restart the device.
Clicking on the button with the Wi-Fi signal below opens the Wi-Fi settings menu. This menu
enables to edit the Wi-Fi name, change the password or set the Wi-Fi channel manually.
Resetting to factory defaults
The device can only be reset to factory defaults if it is connected and in operation. Proceed
as follows:
a) Resetting with the product
• Keep the “
Reset
” button (
J
) on the product pressed (for approx. 6 - 8 seconds) until all LEDs
light up.
• Then release the button.
• The product will restart and the factory settings will be restored. This process takes up to 2
minutes. The process is complete when the “
Wi-Fi
” status LED (
D
) flashes quickly and the
Wi-Fi signal strength LEDs (
C
) glow steadily.
b) Resetting in the web interface
•
Open the product‘s web interface and log in.
•
Click on the gear icon at the bottom right to open the configuration menu.
• Select the menu item for backup and restoration and then click on the blue button at the bot-
tom to reset to factory defaults.
• The product will restart and the factory settings will be restored. This process takes up to 2
minutes. The process is complete when the “
Wi-Fi
” status LED (
D
) flashes quickly and the
Wi-Fi signal strength LEDs (
C
) glow steadily.
Care and cleaning
• Disconnect the product from the power supply before cleaning.
• Use a dry, lint-free cloth to clean the product.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may
damage the casing or cause the product to malfunction.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declares that this
product conforms to Directive 2014/53/EU.
Click on the following link to read the full text of the EU Declaration of Conformity:
Select a language from the menu and enter the order number of the product in
the search field. You can then download the EU Declaration of Conformity in PDF
format.
Disposal
Electronic devices are recyclable waste and must not be placed in household waste.
At the end of its service life, dispose of the product in accordance with applicable
regulatory guidelines.
Specifications
a) Product
Operating voltage ......................... 24 V/DC (Passive PoE)
Power consumption ...................... max. 7 W
Connections .................................. 1x RJ45 10/100 Mbps, WAN/LAN/PoE
Wi-Fi ............................................. IEEE802.11b/g/n; 2.4 GHz (max. 300 Mbit)
Frequency range /
transmission power .......................
2.412 – 2.472 GHz, ≤18.87 dBm (HT20);
2.422 – 2.462 GHz, ≤18.87 dBm (HT40)
Encryption protocols ..................... WPA-PSK; WPA2-PSK; WPA/WPA2
Modes of operation ....................... Access Point (AP), Repeater, Router
Chip set ........................................ MT7628DA
Memory ......................................... Flash 32 MB, DDR2 512 MB
Protection rating ........................... IP65
Device dimensions (W x H x D) .... approx. 55,5 x 180 x 48 mm (without antennas and bracket)
Antenna dimensions (Ø x L) ......... approx. 13 x 250 mm
Weight .......................................... approx. 197 g (with antennas, without bracket)
Operating conditions ..................... -30 to +70 °C, 10 to 90% RH (non-condensing)
Storage conditions ........................ -40 to +70 °C, 10 to 90% RH (non-condensing)
b) Power adapter
Operating voltage ......................... 100 – 240 V/AC, 50/60 Hz
Current consumption .................... max. 0.5 A
Output ........................................... 24 V/DC, 500 mA, 12 W
Output connector .......................... 5.5 x 2.5 mm coaxial power connector