Renishaw RMI-QE, Installation Manual

Page: 13 / 54

2.3
RMI-QE basics
RMI-QE visual diagnostics
A visual indication of system status is provided by LEDs. Status is continuously updated and indication
is provided for:
•
P1, P2, P3, P4 SYSTEM STATUS;
•
LOW BATTERY/START;
•
PROBE STATUS;
•
ERROR;
•
SIGNAL CONDITION.
Magnetic label
A summary of RMI-QE activity is provided on a magnetic label. The label may be placed on any
machine flat metal surface.
SIGNAL LED
P1, P2, P3, P4 SYSTEM STATUS LEDs
LOW BATTERY/START LED
ERROR LED PROBE STATUS LED
NOTE: Keep the front cover clean. All four lower LEDs flashing indicates a wiring fault or output
overcurrent.
abcdh
SIGNAL LED
Off No probes
operating
Good
communications
Poor
communications
Overload error
KEY TO THE SYMBOLS
Continuously on
Flashing
ERROR LED
Off No error
Error
System error
See installation
guide
Overload error
LOW BATTERY/START LED
Off Battery is okay
and no M-code
start/stop in
progress
Battery low
M-code start/
stop in progress
Battery low and
M-code start/
stop in progress
Overload error
PROBE STATUS LED
Probe triggered
Probe seated
System error
See installation
guide
Overload error
P1, P2, P3, P4 SYSTEM STATUS LEDs
Off Probe number empty
Probe number full, in standby
Probe number full, operating
System error
See installation guide
Selection error
Partnering/clearing pending, full
Partnering pending, empty
Partnering complete, probe full
Probe authentication error
Clearing complete, probe empty