Renishaw HPGA, Installation And User Manual

Page: 5 / 40

3
Disclaimer
WHILE CONSIDERABLE EFFORT
WAS MADE TO VERIFY THE
ACCURACY OF THIS DOCUMENT AT
PUBLICATION, ALL WARRANTIES,
CONDITIONS, REPRESENTATIONS
AND LIABILITY, HOWSOEVER ARISING,
ARE EXCLUDED TO THE EXTENT
PERMITTED BY LAW.
RENISHAW RESERVES THE RIGHT TO
MAKE CHANGES TO THIS DOCUMENT
AND TO THE EQUIPMENT, AND/OR
SOFTWARE AND THE SPECIFICATION
DESCRIBED HEREIN WITHOUT
OBLIGATION TO PROVIDE NOTICE OF
SUCH CHANGES.
Trade marks
RENISHAW
®
and the probe symbol are
registered trade marks of Renishaw plc.
Renishaw product names, designations
and the mark ‘apply innovation’ are trade
marks of Renishaw plc or its subsidiaries.
Other brand, product or company names
are trade marks of their respective owners.
Warranty
Unless you and Renishaw have agreed
and signed a separate written agreement,
the equipment and/or software are
sold subject to the Renishaw Standard
Terms and Conditions supplied with such
equipment and/or software, or available on
request from your local Renishaw office.
Renishaw warrants its equipment and
software for a limited period (as set out
in the Standard Terms and Conditions),
provided that they are installed and used
exactly as defined in associated Renishaw
documentation. You should consult these
Standard Terms and Conditions to find out
the full details of your warranty.
Equipment and/or software purchased by
you from a third-party supplier is subject
to separate terms and conditions supplied
with such equipment and/or software. You
should contact your third-party supplier for
details.
CNC machines
CNC machine tools must always be
operated by fully trained personnel in
accordance with the manufacturer’s
instructions.
Care of the system
Keep system components clean and treat
the system as a precision tool.
Before you begin