Renishaw HPGA, Installation And User Manual

Page: 31 / 40

29
Maintenance
You may undertake the maintenance
routines described in these instructions.
Further dismantling and repair of
Renishaw equipment is a highly
specialised operation, which must be
carried out at authorised Renishaw
Service Centres.
Equipment requiring repair, overhaul
or attention under warranty should be
returned to your supplier.
Probe removal
Cleaning the HPGA arm
Ensure garter spring and runner faces are
kept clean and clear of swarf build up.
M16 thread
normal
10 Nm to 12 Nm
(7.37 lbf.ft to 8.84 lb.ft)
Maximum
20 Nm (14.74 lbf.ft)
LP2 probe
Garter spring
NOTE: For information on cleaning the
LP2 probe, please refer to the LP2 probe
system installation guide, H-2000-5021
and for the MP250 probe, please refer
to the MP250 probe installation guide
H-5500-8504.