Renishaw HPGA, Installation And User Manual

Page: 20 / 40

18
Installing the TSI 3 (or TSI 3-C) and HSI interface units
The TSI 3 (or TSI 3-C) and HSI interface units should be installed in the CNC control
cabinet. Where possible, site the units away from potential sources of interference such
as transformers and motor controllers.
System installation
Alternative mounting
M4
Depth 98 mm
(3.86 in)
RR
34.6 mm
(1.36 in)
130 mm
(5.12 in)
4 mm
(0.16 in)
CAUTION:
The HPGA arm must only be used with the TSI 3 (or TSI 3-C) and HSI
interfaces.
dimensions mm (in)