Renesas RX130 Series Application Note Download

Page: 67 / 88

RX Family

ADC Module Using Firmware Integration Technology

R01AN1666EJ0220 Rev. 2.20

Page 67 of 74

Dec 01, 2016

3.4

R_ADC_Read()

This function reads conversion results from a single channel, sensor, double trigger, or self-diagnosis register.

Format

adc_err_t R_ADC_Read(uint8_t unit,

adc_reg_t const reg_id,

uint16_t * const p_data);

Parameters

unit

0 or 1. For MCUs with only one unit 0 should be passed (only the RX64M/RX71M/RX65x have 2 units).

reg_id

Id for the register to read. See type

adc_reg_t

in section 2.10 for the MCU being used.

p_data

Pointer to variable to load value into.

Return Values

ADC_SUCCESS:

Success

ADC_ERR

INVALID_ARG:

unit or reg_id contains an invalid value.

ADC_ERR_MISSING _PTR:

p_data is FIT_NO_PTR/NULL

Properties

Prototyped in file “r_s12ad_rx_if.h”

Description

Reads conversion results from a single channel, sensor, double trigger, or self-diagnosis register.

Reentrant

Yes.

Example

uint16_t data;

/* Read channel 0 on unit 0 */

R_ADC_Read(0, ADC_CH0_REG, &data); // conversion value placed in “data”

Special Notes (RX110/RX111/RX113):

For temperature sensor output and internal reference voltage, discard the first A/D conversion result after the open, and

use the second and the subsequent A/D conversion results.

Summary of Contents for RX130 Series

























































































Search results

Summary of Contents for RX130 Series

Reviews:

Related manuals for RX130 Series

Brands by name

Popular brands

Renesas RX130 Series, Application Note

Search results

Summary of Contents for RX130 Series

Reviews:

Related manuals for RX130 Series

Brands by name

Popular brands