Renesas RX130 Series Application Note Download

Page: 66 / 88

RX Family

ADC Module Using Firmware Integration Technology

R01AN1666EJ0220 Rev. 2.20

Page 66 of 74

Dec 01, 2016

Some features may not be used with others. The following table illustrates this.

Dbl

Trig

Group

Scan

Self-

Diag

Add/

Avg

ANEX Sample

&Hold

Priority

GroupA

Sensors Comparator DDA

Double

Trigger

Group Scan

Self-

Diagnosis

Add/Avg

ANEX

Sample

&Hold

Priority

GroupA

Sensors

Comparator X

Disconnect

Detection

Assist

X - Combination may not be used. For example, ANEX may not be used with group scan modes, Self-Diagnosis,

sensors or Disconnect Detection Assist.

*A - Sample and Hold channels must be in Group A.

*B - Sample and Hold channels must be in Group B or Group C.

*S - Sample and Hold channels cannot be split across groups.

Special Notes (RX130/RX230/RX231):

This function does not support following features.

•

Compare function window B

•

Compare function window A/B composite condition setting

Special Notes (RX130/RX230/RX231/RX64M/RX71M/RX65x):

When using the comparison, configure the comparison after the channel configuration.
This function does not support following feature.

•

Group A priority control setting

Special Notes (RX63x):

Only AN008 to AN020 can be used for setting the number of sampling states. AN000 to AN007 are fixed to 20 states

regardless of the setting.

Special Notes (RX110/RX111/RX113):

For temperature sensor and internal reference voltage, the number of sampling states must be set to 5

s or greater.

Summary of Contents for RX130 Series

























































































Search results

Summary of Contents for RX130 Series

Reviews:

Related manuals for RX130 Series

Brands by name

Popular brands

Renesas RX130 Series, Application Note

Search results

Summary of Contents for RX130 Series

Reviews:

Related manuals for RX130 Series

Brands by name

Popular brands