R11UM0156EJ0240 Rev.2.40
Page 8 of 82
Jul. 28, 2020
PRIME v1.4 Base Node Tool
User Manual
Renesas Electronics Group Confidential
2
.
PC Tool for Base Node
PRELIMINARY
Notice This is not a final specification. Some
parametric limits are Subject to change.
2. PC Tool for Base Node
2.1
System requirement
Host computer: IBM PC compatible machine
OS: Windows(R) 7/10 - 32/64bit
Memory capacity: 2GB or more recommended.
I/O device:
1 USB port (It is used for UART port to connect Renesas G-CPX3 board)
1 LAN port (It is used to connect DCU)
2.2
Installation
Table 2-1 Installation of Base Node tool
File name
Explanation
prime14_cpx3_pc_bn_Rev.XXX.exe
Execute file of Base Node control tool.
Put this file in any directory of the host
PC. No any Install process for this file
is needed.
%Y%m%d%H%M%S_prime14_cpx3_pc_bn.log
Command log file of the Base Node
control tool.
Data/Control packets shown in console
window are stored in this log file.
This file is automatically generated in
same directory with execute file.
The
file
name
includes
time
information as shown Figure 2.1.
%Y%m%d%H%M%S_prime14_cpx3_pc_bn_appemu.log
Log file of AppEmu cycle test (see 3.6).
The results of the data communication
with SN in each step of cycle are
stored in this file.
This log file is automatically generated
in same directory with execute file
when AppEmu cycle test is started.
The
file
name
includes
time
information as shown Figure 2.1.
%Y%m%d%H%M%S_prime14_cpx3_pc_bn_fu.log
Log file of Firmware Upgrade (FU, see
3.7).
The Multicast FU progress is stored in
this file.
This log file is automatically generated
in same directory with execute file
when Multicast FU process starts.
The
file
name
includes
time
information as shown Figure 2.1.
%Y%m%d%H%M%S_prime14_cpx3_pc_bn_fu_statistics.log
Result summary file of FU (see 3.7).
The Multicast FU results of each node
are stored in this file.
This file is automatically generated in
same directory with execute file when
Multicast FU process starts.
