R11UM0156EJ0240 Rev.2.40
Page 16 of 82
Jul. 28, 2020
PRIME v1.4 Base Node Tool
User Manual
Renesas Electronics Group Confidential
3
.
PC Tool operation procedure
PRELIMINARY
Notice This is not a final specification. Some
parametric limits are Subject to change.
Table 3-2 Setting Menu Item
Item
Description
Default setting
Applied timing
Evaluation Board
Using Evaluation Board
J70 (RTK0EE0003D01001BJ) or J71
(RTK0EE0003D03001BJ) can be selected.
J70
Booted
Channel
Channel Select for PRIMEv1.4
CENELEC-A mode or Global mode (Ch.1,
Ch.2, ... Ch.8, FULL, FCC or ARIB) can be
selected.
CENELEC-A
Booted
SNA
Subnetwork Address (setting dialog pops up) ABCDABCD0001
Booted
SPC
Security Profile
No SPC, SP1 or SP2 can be selected.
No SPC
Booted
SWK
SWK setting (setting dialog pops up).
Booted
SAR
Segmentation
and
Reassembly
(SAR)
packet size
NOTE: In case
of “BC Mode on”, if this value
is specified larger than 48Byte, 48Byte is
applied to this value.
64Byte
Anytime
REG SAR_SIZE
MAX size of SAR packet
This value is applied to REG_RSP packet.
255Byte
Booted
REG RM_F
RM_F field in REG control packet
The value is applied to REG_RSP packet.
0: Disable
Booted
BN BCN FREQ
Beacon Frequency of BN
Every frame
Booted
BN BCN FRA LEN Beacon Frame Length of BN
1104 symbols
Booted
BN BCN MOD
Beacon Modulation of BN
DBPSK-CC
Booted
SW BCN FREQ
Beacon Frequency of Switch nodes
8 frame space
Booted
BC Mode
BC Mode on/on(v1.3.6)/off
NOTE
: “on(v1.3.6)” does NOT use the robust
modulation (DBPSK_R, DQPSK_R).
Off (v1.4)
Booted
Delay
Interval time of between each sending a data
packet
500 msec
Anytime
DCU Connect
DCU Connect on/off and Port setting (setting
dialog pops up)
Off
Booted
ARQ WINSIZE
Window size used for ARQ
The value for ARQ.WINSIZE field in ARQ
sub header.
ARQ.WINSIZE(TX): 1
ARQ.WINSIZE(RX): 1
Booted
SEC Format
Use old SEC format on/off
Off
Booted
