R0E521000EPB00 User’s Manual
5. Troubleshooting
REJ10J0844-0400 Rev.4.00 October 16, 2007
Page 83 of 88
5.2.3 Errors Occur at Debugger Startup
Table 5.3 Checkpoints of errors at debugger startup
Error Connection
to
the user system
Checkpoint
Target MCU is uncontrollable.
Connected
(1) Check that the NQPACK etc. mounted on the user system is
soldered properly.
(2) Check that the connector is installed properly to the user system.
5.3 How to Request a Support
After checking the items in "5 Troubleshooting", fill in the text file which is downloaded from the following URL, then send
the information to your local distributor.
http://tool-support.renesas.com/eng/toolnews/registration/support.txt
For prompt response, please specify the following information:
(1) Operating
environment
- Operating voltage:
[V]
- Operating frequency:
[MHz]
- Clock supply to the MCU:
Internal oscillator/External oscillator
(2) Condition
- The emulator debugger starts up/does not start up
- The error is detected/not detected in the self-check
-
Frequency
of
errors:
always/frequency
(
)
(3) Problem
Summary of Contents for R0E521000EPB00
Page 2: ......
Page 88: ...R0E521000EPB00 User s Manual...
