Renesas R0E521000EPB00 User Manual Download Page 21

Page: 21 / 88

R0E521000EPB00 User’s Manual

2. Setup

REJ10J0844-0400 Rev.4.00 October 16, 2007

Page 21 of 88

2.2 Installing the M16C R8C PC7501 Emulator Debugger

If the OS used in your host machine is Windows XP or 2000, this installation must be executed by a user with administrator

rights. Be aware that users without administrator rights cannot complete the installation.

Install the emulator debugger (M16C R8C PC7501 Emulator Debugger) following the procedure described below.

(1) Downloading the emulator debugger

Download the latest emulator debugger from the URL below.

http://download.renesas.com/eng/mpumcu/upgrades/in_circuit_emulators/pc7501/index.html

(2) Launching

the

installer

Start the “setup.exe” program.

(3) Entering the user information

In the “user information” dialog box, enter the user information (contractor, section, contact address, and host machine).

The supplied information will be turned into a format by which user registration will be provided by e-mail.

(4) Completing the installation

A dialog box will be displayed indicating that setup has been completed. It means that the installation you made is

completed.

Summary of Contents for R0E521000EPB00

























































































Search results

Summary of Contents for R0E521000EPB00

Reviews:

Related manuals for R0E521000EPB00

Brands by name

Popular brands

Renesas R0E521000EPB00, User Manual

Search results

Summary of Contents for R0E521000EPB00

Reviews:

Related manuals for R0E521000EPB00

Brands by name

Popular brands