R0E521000EPB00 User’s Manual
3. Usage (Emulator Debugger)
REJ10J0844-0400 Rev.4.00 October 16, 2007
Page 45 of 88
3. Usage (Emulator Debugger)
This chapter describes how to start up the emulator debugger from the High-performance Embedded Workshop and operate
the major windows.
3.1 Starting Up the Emulator Debugger
When debugging the completed programs, switch the session. The session can be changed by the drop down list of the tool bar
shown below.
You will have as many sessions created as the number of targets you selected when creating a project, so select the session that
corresponds to the target to be connected from the drop-down list. To connect to the R8C emulation probe, select
“SessionM16C_R8C_PC7501_Emulator.”
3.1.1 INIT Dialog Box
After specifying the session, an Init dialog box to connect the target is displayed. The Init dialog box is used to set the items
that need to be set when the emulator debugger starts up. The contents set in this dialog box remain effective the next time you
start the debugger.
(1) MCU tab
1) Specifying the MCU file
Specifying the MCU file
A file selection dialog box will be displayed, so select the desired MCU file.
- The MCU file contains the information specific to the target MCU.
(1) Click the “Refer…” Button”.
(2) ”Select MCU File” dialog box will be displayed. Specify the MCU file
fort he target MCU. (Here, an MCU for R8C/17 Group is selected)
The specified MCU file is displayed at the MCU area field of MCU tab.
Summary of Contents for R0E521000EPB00
Page 2: ......
Page 88: ...R0E521000EPB00 User s Manual...
