2
1
4
3
NU750_2_G1-FRA.qxd 28/07/05 13:22 Page 1.78
1.78
CLOCK
Clock
1
The time is displayed when the
ignition is switched on.
Setting the clock
- Turn button 2 briefly to the right.
The hours display will flash.
Press button 2 briefly or hold it
down to change the hours display.
- Turn button 2 to the right again
briefly.
The tens flash on the minute
display.
To alter the minutes, press button
2 briefly or hold the button down.
- Turn button 1 to the right again
briefly.
The minute display flashes.
To adjust the minutes, press
button 1 briefly or hold the button
down.
- Finally, turn button 1 to the right
again to confirm that the altered
time is correct.
Clock
4
Setting the clock
With the ignition switched on
and
display 4 set to total mileage
recorder and clock function, press
and hold button 3, to access Time
setting mode (clock flashing) then
release the button.
- Pressing and holding down button
3 allows you to scroll through the
hours and minutes quickly;
- pressing button 3 briefly allows
you to set the time minute by
minute.
If the electrical supply is cut
(battery disconnected, broken
supply wire, etc.), the clock will
lose its time setting.
The clock must be reset.
For your safety, we recommend
that you do not adjust the clock
while driving.
NU750_2_G1-ENG.qxp 9/9/2005 2:40 PM Page 1.78 (Black plate)
