1
2
1.4 16V
1
2
1.2
1
2
1.2 16V
1
2
1.2 16V
NU750_2_G4-FRA.qxd 25/07/05 9:52 Page 4.05
4.05
ENGINE OIL LEVEL
(continued)
Topping up/filling
The vehicle must be parked on level
ground and the engine should be
cold (for instance, before the engine
is started up for the first time in the
day).
Special note for 1.2 version
Unclip the dipstick to remove it. Do
not forget to clip it back in when
replacing it.
Engine oil grade
Refer to the Warranty and Services
booklet for your vehicle for
information regarding which grade
of oil to use.
- Unscrew cap 1.
- top up the level (for information,
the capacity between the minimum
and maximum reading on dipstick
2 is between 1.5 and 2 litres
depending on the engine);
- wait for approximately ten minutes
to allow the oil to flow into the
engine;
- check the level using the dipstick 2
(as explained above);
Do not exceed the
Max
level and do
not forget to refit cap 1.
NU750_2_G4-ENG.qxp 9/7/2005 5:20 PM Page 4.05 (Black plate)
