6
5
4
1
2
3
4
5
6
NU750_2_G1-FRA.qxd 28/07/05 13:22 Page 1.26
1.26
REAR SEAT BELTS
Rear centre belt
Slowly unwind belt 1 until the black
buckle 2 locks into housing 3.
Rear lap belt with manual
adjustment
The belts are fastened and
unfastened in the same way as the
inertia reel type belts.
Adjusting the lap belt
- To tighten, pull on the free end 6 of
the belt.
- To loosen, tilt adjusting buckle 4
perpendicular to the seat belt,
press the buckle while pulling lap
belt 5.
Rear side seat belts
The belts are locked, unlocked and
adjusted in the same way as the
front belts.
The central seat of the rear
bench seat cannot be used
when it is configured as a
two-seater, as there is no
seat belt.
Make sure that the rear bench
seat is locked in position
correctly so that the seat belts
will operate efficiently.
Refer to the information on the
rear bench seat in section 3.
NU750_2_G1-ENG.qxp 9/9/2005 2:40 PM Page 1.26 (Black plate)