9
7
3
10
6
QXBIUDB*T[G 3DJH
AVANTIME D66 nu647-2 C:\Documentum\Checkout\nu647-2_eng_T3.WIN 3/4/2002 13:10 - page 15
3.15
AUTOMATIC AIR CONDITIONING
(continued)
Personalised operation
Selection of air flow distribution
The system normally operates in
automatic mode but you can change
the settings determined by the
system (quantity of air, etc.).
Automatic mode is switched off by
pressing
one
of
the
following
buttons.
The indicator light in button
6
will
go out.
- Button
3
:
The
air
flow
is
distributed to the side vents and
the centre vents only.
-
Button
9
:
The
air
flow
is
distributed
between
the
demisting/de-icing vents and the
front and rear footwells.
-
Button
10
:
The
air
flow
is
distributed to the front and rear
footwells, with a light flow of air
to the demisting/de-icing vents.
The other parameters remain under
automatic control.
Varying the blower speed
In automatic mode, the system uses
the most suitable amount of air to
reach and maintain the desired
temperature.
Automatic mode is switched off by
pressing button
7
.
The indicator light in button
6
will
go out.
These buttons increase or decrease
the amount of air blown into the
passenger compartment.
The other parameters remain under
automatic control.
Stopping the system
Press button
7
(–) until all the
indicator lights go out.
The system can be switched back on
manually by pressing one of the
driver's
control
keys,
or
automatically after the ignition has
been switched off for more than 15
minutes.
