REMKO MVW 222, Operating And Installation Instructions

Page: 12 / 40

Fig. 7: Opening front panel
1
A B
Fig. 8: Blow-off direction switch
1: Blow-off direction switch
A: Switch setting [A]
B: Switch setting [B]
Automatic selection of the blow-out side
Operating mode Cooling mode Heating mode
Situation
When the setpoint
is reached or after
1 operating hour.
When the unit is
started or when the
setpoint is not
reached.
The unit blows out
from the top and
bottom side when
the setpoint is
nearly reached to
optimally distribute
the warm air.
When the unit is
started or when the
room temperature
is low.
Blow-out direction
The unit only blows
out from the top to
avoid direct contact
between persons
and air flow.
The unit blows out from the top and
bottom to reach the corresponding set-
point as quickly as possible.
The unit only blows
out from the top to
avoid direct contact
between persons
and air flow.
REMKO MXV series
12