Activate/deactivate delayed switching on and
off
1.
The unit switch-on delay can be activated
with the
key. After pressing this key,
“Timer on” and “0.0h Later On” appear on the
IR remote control display.
The time can be set by pressing the
or
keys.
2.
The unit switch-off delay can be activated
with the
key. After pressing this key,
“Timer off” and “0.0h Later Off” appear on the
IR remote control display.
The time can be set by pressing the
or
keys.
The time is set in 0.5 hour increments by
pressing the key for a longer period of time. If
the setting is greater than 10 hours, the settings
are made in 1 hour increments. The maximum
switch-on or switch-off delay is 24 hours.
To exit the setting mode, the time must be reset to
0.0h.
The “Switch-on delay” and “Switch-off delay” func-
tions can also be combined.
Locking the IR remote control
By pressing the key (pin required), all functions
of the IR remote control can be disabled (except
Lock, Cooling or Heating only, and the Addressing
function).
1.
After pressing the key, the lock symbol
appears on the IR remote control display.
The IR remote control can no longer be oper-
ated.
2.
The key lock can be deactivated by pressing
the key again. The symbol goes out.
Activating the “Cooling only” function
The IR remote control is factory programmed for
the cooling and heating functions. The “Cooling
only” function can be activated or deactivated by
pressing the key. Selecting the heating mode is
then no longer possible when the function is acti-
vated.
17
Summary of Contents for MVW 222
Page 39: ......
