Select the operating mode and temperature
1.
Press the key several times to select the
desired operating mode. The selection
appears on the display of the IR remote con-
trol.
2.
In the “Automatic”, “Cooling”, “Dehumidifying”
or “Heating” operating modes, the desired
temperature can be set in 1 °C steps using
the and arrow keys.
The temperature cannot be set in the “Recircu-
lation” operating mode!
Setting the fan speed
1.
In the standard setting, the fan speed can be
set in 7 stages via the IR remote control.
A
B
C
A: Low
B: Medium
C: Up
2.
Optionally, the IR remote control can be pro-
grammed (see section ...) so that only 3 fan
stages can be set:
A
B
C
A: Low
B: Medium
C: Up
Individually adjusting the air discharge fin
1.
Use the
key to move the air discharge
fin to 5 different positions.
2.
The fin setting changes by approx. 6° each
time the key is pressed. If the unit is switched
off, the key has no function. When the unit is
switched on, the air discharge fin returns to
the fixed position.
This function is only available for units with ver-
tical air discharge fins!
Using the air discharge fin with the swing func-
tion
1.
As soon as the unit is switched on, the
key can be used to activate the swing func-
tion. The symbol appears on the remote con-
trol display for 15 seconds
2.
If the swing function is active, it can be deac-
tivated again by pressing the
key again.
15
Summary of Contents for MVW 222
Page 39: ......
