Green House Manual
Page | 4
Once your strings are aligned you will notice how the strings meet at each corner of your
greenhouse where your temporary markers were placed.
(A, B, C, D)
Installing the ground Pipes
1.
Use a torch to burn a hole through the ground cover where the ground pipes will go
(Points A,
B, C, D)
2.
Place the driving cap on top of the ground pipe.
Do not drive the pipe without the driving cap
as this will damage the pipe.
The ground pipe should be on the inside of the strings and as close
as possible to the string without touching it.
3.
Proceed to hammer them into the holes you burned through the ground cover as shown below.
Driving Cap
Ground Pipe
